"ECLIPSE" is the new high-integration instruments family from Flybox. The display, very readable in direct sunlight, shows the engine and flight data organized in one or more pages. Many features make ECLIPSE unique in the avionics market, such as the intuitive graphical data representation, the vocal alarms, the 3 color cameras video inputs and the datalogger with integrated graphical viewer. Four different versions meet the most demanding requirements, allowing you to configure your instrument panel to the best quality price ratio available today.
more about Eclipse at http://www.flyboxavionics.it/en/eclipse.html
ECLIPSE EIS shows all engine data, fuel management data and hour-meters.
Functions available:
Oil pressure
Oil temperature
6 CHT inputs
6 EGT inputs
Fuel pressure
Voltmeter
For all the above measurements it's possible to activate an alarm when the relative measurement is out of range. An alarm can be both on display and on the audio out (tone or vocal alert).
Tachometer
Hour-meter, divided also by time in green, yellow and red zones.
Peak RPM memories (last flight RPM peak and max RPM ever)
MAP with integrated sensor
OAT (Outside air temperature)
CAT (Carburetor/airbox air temperature)
Battery current
Fuel computer (fuel flow, endurance, remaining fuel, burned fuel, range and reserve at destination). It's possible to activate 3 alarms for the remaining fuel, time to empty and for balancing tanks. When a measure drops below its setpoint the alarm is activated on both display and/or audio out (tone or vocal alert)
3 fuel level sender inputs with tanks shape correction
GPS receiver included
3 video inputs for color cameras (video format: PAL composite)
Data logger
Intercom audio out
Software upgradable by means of SD card
Dimensions: 196 x 139 x 60 mm
Weight: 900 g
Operating temperature range: -20~+70 °C
Supply voltage: 12~15 Vdc
Supply current: 1 A
Electrical connections using D-Sub connectors
Software upgradable by means of SD card
